{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting disc PSF STEELOX EXTRA THIN 125 mm
Article no.: 563435 125
Article code:
- Grinding medium code: A
- Iron, sulphur and chlorine constituents: < 0.1
- Shape description: flat
- Bore ⌀: 22.23
- recommended approach angle: 90
Product details
Technical Data
| Grinding medium code | A | |
| Specification | A60P-PSF-STEELOX | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Shape description | flat | |
| Disc ⌀ | 125 mm | |
| Disc thickness | 1 mm | |
| Bore ⌀ | 22.23 mm | |
| for material thicknesses | 3 mm - 5 mm | |
| recommended approach angle | 90 degrees | |
| optimised for material | Steel; HSS | |
| Propulsive equipment | Angle grinders | |
| maximum circumferential speed | 80 m/s | |
| maximum speed | 12,200 min-1 | |
| Type of product | Cutting disc |
Identification numbers & Classifications
| Article number | 563435 125 | |
| EAN / GTIN | 4007220560372 | |
| Manufacturer number | 4007220560372 |
Application Table
Description
Version:
- Grit, bonding, abrasive additives as well as reinforcement of the cutting discs are optimised for maximum cutting performance and working life in their respective applications.
- Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) specially suited for quick burr-free cutting with low thermal stress. On older angle grinders please ensure discs are precisely centred! Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
- Shapes: Cutting discs flat (shape 41) or with depressed centre (shape 42).
Extra thin cutting disc for very quick low-burr cutting with low thermal stress and easy ergonomic cut guidance.
General-purpose PSF-Line cutting discs for cutting off sections, pipes etc.
Application:
For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.
Specification:
A60P-PSF-STEELOX.
Note:
The disc thickness should be at least 20% of the material thickness to be cut. For stainless steel, use cutting discs at reduced speed.