{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Axial milling cutter spigot VARIA, V5, Spigot ⌀ d1: 16mm
Article no.: 319841 16
Article code:
Product details
Technical Data
| Spigot ⌀ d1 | 16 mm | |
| Adapter | V5 | |
| Milling mandrel length L4 | 19 mm | |
| Collar width L5 | 6 mm | |
| Type of product | Milling cutter spigot |
Identification numbers & Classifications
| Article number | 319841 16 | |
| Manufacturer number | 42.V516L08 |
Description
Advantage:
- Quick change using a single clamping point, therefore tool change without risk of injury.
- Cutter tools lie pre-set at the machine.
- Compact design - low unit costs.
Application:
With drive keyway. For milling cutters with keyways and cross slots.
Note:
Through coolant supply on request.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V3, V4 and V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V3, V4 and V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop.