{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide deburrer 60° 4 mm
Article no.: 208125 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h6
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 4 | |
| Direction of infeed | horizontal and oblique | |
| Countersink tip angle | 60 degrees | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Dimension S | 3.9 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 4 mm | |
| Chamfer mill | 30 degrees | |
| Feed fz in steel < 900 N/mm2 | 0.02 mm | |
| Shank tolerance | h6 | |
| Colour ring | without | |
| Corner chamfer angle | 60 degrees | |
| Type of product | Deburrers |
Identification numbers & Classifications
| Article number | 208125 4 | |
| EAN / GTIN | 4045197858894 |
Application Table
N
180
N
140
N
105
P
70
P
60
P
55
P
35
M
40
M
30
K
55
Description
Version:
Tolerance: Dimension S = ±0.1 mm, point angle ±10 arc minutes.
With special flute geometry for smooth cutting.
With special flute geometry for smooth cutting.
Application:
Perfectly suitable for chamfering and deburring component edges and for contouring applications.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide deburrer 60° 4 mm
on request
In stock
82 pieces in stock
26,22 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
57 pieces in stock
18,23 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
106 pieces in stock
35,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
347 pieces in stock
20,70 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | TiAlN |
| Colour ring | without | without | without | without |
| Overall length L | 54 | 50 | 54 | 50 |
| Shank | DIN 6535 HA with h6 | DIN 6535 HA with h6 | DIN 6535 HA with h6 | DIN 6535 HA with h6 |
| Cutting edge ⌀ DC | 4 | 4 | 4 | 4 |
| Tolerance nominal ⌀ | h6 | h6 | h6 | h6 |
| Chamfer mill | 30 | 30 | 30 | 30 |