{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide roughing end mill HPC, TiAlN, ⌀ d11 DC: 9mm
Article no.: 205490 9
Article code:
Product details
Technical Data
| Coating | TiAlN | |
| Machining strategy | HPC | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Cutter diameter Dc | 9 mm | |
| Cutting edge length Lc | 19 mm | |
| Overall length L | 72 mm | |
| Shank diameter DS | 10 mm | |
| Twist angle | 30 degrees | |
| Tolerance class | d11 | |
| Corner chamfer width | 0.5 mm | |
| Tool material | solid carbide | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.045 mm | |
| Max. cutting depth, Full slot milling | 13.5 mm | |
| Max. cutting depth, Side milling | 19 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.04 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01001005 | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Arbor size | 10 | |
| Length of shank LS | 40 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Schruppfräser HPC | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Number of effective cutters (end face) Z | 4 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Helix angle characteristic | unequal spacing | |
| Tool application group | HR | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Interface | joint 1 | |
| Weight | 65 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | green | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.5 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 205490 9 | |
| EAN / GTIN | 4045197551535 | |
| Manufacturer number | 205490 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
H
35
M
60
M
50
K
90
Description
Version:
Dimensions similar to DIN 6527.
For high feed rates, very high metal removal rate.
With special knuckle profile.
For high feed rates, very high metal removal rate.
With special knuckle profile.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product No. 205550.
Recommended successor product No. 205550.