{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Shoulder mill 90° with Weldon shank, for indexable inserts AP..
Article no.: 215800 25/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 49 mm | |
| Overall length Ltot | 105 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 47 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.72 degrees | |
| Ramping length L for αmax | 19.85 mm | |
| suitable indexable insert | AP.. 1003.. | |
| Set of insert screws | 219814 (8IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 215800 25/3 | |
| EAN / GTIN | 4045197133175 | |
| Manufacturer number | 215800 25/3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Toepassing:
Universeel gebruik in alle materialen.
- Hoek- en spiebaanfrezen, binnenwaarts kopiëren, circulair frezen, helicoïdaal frezen, omtrekfrezen.