{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 12 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | WR | |
Tolerance nominal ⌀ | js14 | |
No. of teeth Z | 3 | |
Helix angle | 36 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 53 mm | |
Overall length L | 110 mm | |
Shank ⌀ Ds | 12 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.05 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 192520 12 | |
EAN / GTIN | 4045197106674 | |
Manufacturer number | 192520 12 |
This article |
Recommendations |
|||
---|---|---|---|---|
Roughing end mill HSS-Co8, uncoated, ⌀ js14 DC: 12mm |
||||
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Colour ring | yellow | without | without | without |
Milling profile | WR | NF | HR | NR |
Overall length L | 110 mm | 110 mm | 110 mm | 110 mm |
Standard | DIN 844 B | DIN 844 B | DIN 844 | DIN 844 B |
Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm |
Tolerance nominal ⌀ | js14 | k10 | js12 | k12 |