{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® 90° shoulder mill MTC 40/6 mm
Article no.: 215575 40/6
Article code:
- Unghi de reglare κ: 90
- Utilizarea frezei: Frezare pe colţ; Frezare circulară; Prelucrare înclinată
- Împărţirea tăişului: inegal
- Răcire interioară: da
- Strategie de aşchiere: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 6 | |
| Tip de coadă | cu alezaj | |
| Unghi de reglare κ | 90 grad | |
| Utilizarea frezei | Frezare pe colţ; Frezare circulară; Prelucrare înclinată | |
| Împărţirea tăişului | inegal | |
| Răcire interioară | da | |
| Strategie de aşchiere | MTC | |
| Schimbare sculă | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 16 mm | |
| ⌀ D3 | 37 mm | |
| Circular interpolation milling ⌀ Dmin | 77 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 1.8 mm | |
| Ramping angle αmax | 0.5 degrees | |
| Ramping length L for αmax | 34.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Tip produs | Freză |
Identification numbers & Classifications
| Article number | 215575 40/6 | |
| EAN / GTIN | 4045197409355 |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).