{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 789206 12X340
“7” SDS-max carbide-tipped hammer drill, ⌀×overall length: 12X340mm
Article no.: 789205 12X340
Article code:
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Max
Find similar products here:
Product details
Technical Data
| ⌀ | 12 mm | |
| Overall length | 340 mm | |
| Working length | 200 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Max | |
| Number of cutting edges Z | 2 | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789205 12X340 | |
| Manufacturer number | 2608586738 |
Description
Version:
Drill head with square cross section from ⌀ 16 mm. Special carbide insert geometry for longer tool lives.
Centring point allows accurate spot drilling and good guidance of the centre within the hole. Large flute channels for quick evacuation of waste material, resulting in less friction.
Centring point allows accurate spot drilling and good guidance of the centre within the hole. Large flute channels for quick evacuation of waste material, resulting in less friction.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using long drills > 500 mm, first drill a pilot hole at least 150 mm deep with a shorter drill (preferably of the same ⌀).