{{ name }}
Cikkszám {{ combinedCodeWithHighlight }}
Cikkszám:
EAN / GTIN:
Gyártó száma:
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815, Blue, 457 mm x 23 m, 0.38 mm
Cikkszám: 7000042745
Cikkszám:
Kérjük, vegye figyelembe a szállítási időt és a korlátozott tanácsadást:
Ezt a terméket közvetlenül a gyártótól rendeljük meg Önnek, mivel nem része a fő kínálatunknak, és nem tartjuk raktáron.
InfoTermékadatok
Technikai adatok
| Termék fajtája | Ragasztószalag |
Azonosító számok és osztályozások
| Cikkszám | 7000042745 | |
| EAN / GTIN | 00051125747714 | |
| Gyártó száma | 7000042745 |
Leírás
Kivitel:
Product Colour: Blue
This 0.015 inch (0.38 mm) blue, double coated foam tape has the air release feature adhesive with easy plate side removal.
Provides high quality firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.
Overall Width: 457.2 mm
Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
This 0.015 inch (0.38 mm) blue, double coated foam tape has the air release feature adhesive with easy plate side removal.
Provides high quality firm combination print. The adhesives remove cleanly from the print plate and the print cylinder.
Overall Width: 457.2 mm
Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Leírás:
Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815. Our 0.38 mm blue, double coated foam tape has the air release feature with easy plate side removal. It is used for plates that contain mostly solids in a combination of solid and halftone images.
Jellemző:
Blue, flexo plate mounting tape with air release feature adhesive
0.38 mm thickness
Firm
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
0.38 mm thickness
Firm
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
Figyelem:
For mounting photopolimeric plates to print cylinders or sleeves