{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide ball nose slot drill HPC TiAlN 16 mm GARANT
Article no.: 207477 16
Article code:
Product details
Technical Data
| Indvendig køling | no | |
| Kølevæskeindgang | without cooling lubricant entry | |
| Kølevæskelækager | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Producentbetegnelse | VHM-Vollradiusfräser | |
| Grænseflade, placering | on the machine | |
| Holdertype | Plain shank | |
| Holderform | form A | |
| Holderdesign | metric | |
| Holderstørrelse, metrisk | 0160 mm | |
| Holdertoleranceklasse | h6 | |
| Skaftdiameter | 16 mm | |
| Skaftlængde | 51 mm | |
| Skaftudførelse | HA | |
| Skæremateriale | solid carbide | |
| Spåntagningsgruppe | M (stainless steel) | |
| Skærestof, producentbetegnelse | VHM TIALN | |
| Belægning | TiAlN | |
| Cutter diameter | 16 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | f8 | |
| Cutting edge length | 20 mm | |
| ISO milling cutter type | round profile mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 4 | |
| Number of effective cutters, end face | 4 | |
| Twist direction | right-hand | |
| Twist angle | 45 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius | 8 mm | |
| Radius | 8 mm | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Grænseflade | joint 1 | |
| Længde på udhæng | 31 mm | |
| Nyttelængde | 20 mm | |
| Samlet længde | 82 mm | |
| Funktionslængde | 82 mm | |
| Vægt | 218 g | |
| Skæreretning | right-hand cutting | |
| Værktøjsdesign | solid carbide | |
| Standard | Werksnorm | |
| Medie | without data carrier | |
| Bearbejdningsprocesser | Copy milling | |
| Farvering | blue | |
| Spåntagningsstrategi | HPC | |
| Type of product | round profile mill | |
| Correction factor fz | 1,25 | |
| Cutting depth min. | 0,01 mm | |
| Skæredybde maks. | 20 mm; 0,8 mm |
Identification & Classification
| Article number | 207477 16 | |
| EAN / GTIN | 4045197455512 | |
| Manufacturer number | 207477 16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
P
250
P
230
P
200
P
160
M
95
M
85
Description
Version:
Special geometry and coating for machining stainless and acid-resistant steels. 4 end faces up to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.
Tolerance: Radius contour = ±0.005 mm.
Note:
New generation available! Successor product is No. 207473.