{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
MasterSteel solid carbide roughing end mill HPC TiAlN 3 mm GARANT
Article no.: 203035 3
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0,06 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0,02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0,025 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
203035 3
Copy |
|
| EAN / GTIN |
4045197718730
Copy |
|
| Manufacturer number |
203035 3
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
260
suitable for / [m/min]
P
ISO code:
240
suitable for / [m/min]
P
ISO code:
190
suitable for / [m/min]
P
ISO code:
180
suitable for / [m/min]
P
ISO code:
150
suitable for / [m/min]
M
ISO code:
80
suitable for / [m/min]
M
ISO code:
70
suitable for / [m/min]
K
ISO code:
250
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
For roughing and finishing.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Up to 1.5×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.