{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Surftest surface roughness measuring tool SJ411
Article no.: 499219 SJ411
Article code:
- Interface: USB interface; Digimatic interface
Product details
Technical Data
| maximum measuring range | 800 / 80 / 8 µm | |
| graphic representation | Measurement profile, BAC curve, ADC curve | |
| Interface | USB interface; Digimatic interface | |
| recorded profiles | Primary, roughness, ripple profiles; roughness and ripple motif | |
| Measurement travel for longitudinal sensing | 25 (straightness 0.3 µm) mm | |
| Cut-off (λc) | 0.08; 0.25; 0.8; 2.5; 8; 25 mm | |
| Scanning speed | 0.05; 0.1; 0.2; 0.5; 1 mm/s | |
| Gauging force | 0,75 mN | |
| Contact point radius | 2 µm | |
| Power supply | Mains operated | |
| Type of product | Surface roughness measuring device |
Identification numbers & Classifications
| Article number | 499219 SJ411 | |
| EAN / GTIN | 4946368849607 | |
| Manufacturer number | 193051Y |
Description
Version:
Transportable cordless reference level system with dust-protected, touch-sensitive operating screen, and integral printer.
- Very easy intuitive menu-guided controls with clear presentation of measured results and profiles on a 5.7 inch colour display.
- Optional measuring with free scanning system or scanning rail.
- Measurement of roughness, ripple and primary profile.
- Statistics function and colour-coded tolerance evaluation.
- Large number of internationally recognised parameters to DIN EN ISO, VDA, JIS, ANSI, and MOTIF, and 16 integral languages.
- Phase correction Gauss filter to DIN EN ISO 16610-21 (supersedes DIN EN ISO 11562).
- Compensation function for radii and inclinations.
- DAT function: Digital inclination wizard for aligning the feed unit position.
- Two different calculations can be performed based on just a single measurement.
- Quick output and documentation of measurement results, graphics and measurement conditions on the integral printer.
- Easy archiving of measured data on an SD memory card.
- The calibration values can be saved and recalled using five different buttons.
Application:
- Measurement of deep slots.
- Measurement with probe facing upwards.
- Cylinder measurement with a support foot.
- Measuring the surface roughness of cylinders transversely to the cylinder’s axis.
- Measurement with measuring stand and levelling table.
Supplied with:
Including feed unit with standard contact point, 5 rolls of thermal paper No. 499050, mains adapter, calibration standard, user manual, and storage case.
Optional extras:
Note:
Free-of-charge analysis software available on request. Only available in Germany and Austria!