{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Ronde trekpons, zonder kogeldruklager, Stempel-⌀ (gat-⌀): 60mm
Réf.: 834000 60
Référence:
Détails du produit
Caractéristiques techniques
| Voor materiaal | Plaatstaal | |
| Voor dikte materiaal max. | 3 mm | |
| Diameter gat | 60 mm | |
| Voor schroefdraad van pantserstalen pijp DIN 40430 | Pg48 | |
| Drukbout | M 20×1,5×80 | |
| Voor te boren gatdiameter | 21 mm | |
| Sleutelwijdte van drukbout | 30 mm | |
| Stansvormen | cirkel | |
| Producttype | trekpons |
Identification et classification
| Référence article | 834000 60 | |
| EAN / GTIN | 2050000996603 | |
| Réf. fabricant | 834000 60 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
Consisting of matrix, punch, and draw bolt.
Without ball thrust bearing.
Without ball thrust bearing.
Application:
For punching holes into diverse materials such as sheet steel, sheet stainless steel, sheet aluminium, sheet copper etc. Particularly useful where access is difficult (e.g. large sheet metal plates, control cabinets, fuse boxes, junction boxes, dashboards, sink basins, bodywork etc.). Not suitable for pipework. It is imperative to grease the pressure screw and matrix before use.
Operation:
a) using a wrench
b) using manual hydraulics No. 834655 size 1.
c) using a manual hydraulic drive No. 834700. From 50 mm ⌀ upwards the use of the manual hydraulic drive is recommended.
Operation:
a) using a wrench
b) using manual hydraulics No. 834655 size 1.
c) using a manual hydraulic drive No. 834700. From 50 mm ⌀ upwards the use of the manual hydraulic drive is recommended.
Material:
Special tool steel, burnished.
Note:
- When using hydraulic tools, use draw bolt No. 834070 (optional accessory) instead of the pressure screw.
- Size 32 and 35 for holes in stainless steel sinks, to attach 1/2 inch sink fitments.