{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Mandrin de tour à 3 mors en acier, centrage cylindrique, DIN 702-4, ⌀ ext. A: 125mm
Réf.: 312911 125
Référence:
Détails du produit
Caractéristiques techniques
| Number of jaws | 3 pcs. | |
| Outer diameter | 125 mm | |
| Height without jaws | 59.5 mm | |
| Height with jaws | 79.5 mm | |
| Aperture diameter | 35.5 mm | |
| Centring diameter | 95 mm | |
| Centring hole depth | 4 mm | |
| Max. speed | 5,500 min-1 | |
| With stud | no | |
| Type of product | lathe chuck | |
| Material | Steel | |
| Standard | DIN 702-4 | |
| Operation | manual | |
| Weight | 5 kg | |
| Content | single part |
Identification et classification
| Référence article | 312911 125 | |
| EAN / GTIN | 4062406154585 | |
| Réf. fabricant | 312911 125 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Manual chucks with gear scroll, centrically clamping.
- Body made of cast iron or steel.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- High concentricity, more precise than DIN 6386 requirement.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. The chuck is secured from the rear by means of screws. The flange blanks must always be fitted first to the machine and then to the chuck.
Standard:
DIN 702-4.
Supplied with:
Includes: 1 set = 3 hardened inside jaws, stepped on the outside.
1 set = 3 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 3 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
Optional extras:
Warning:
Intended use
Reasonably foreseeable misuse
- Manually operated lathe chuck with gear scroll.
- Centred clamping of workpieces on lathes and other suitable machine tools.
- Use only in conjunction with additional jaws article no. 312971 – 312991.
- Article no. 312906 and 312911: Recessed mount acc. to ISO 702-4.
- Article no. 312931: For spindle nose acc. to ISO 702-3 with studs and collar nuts.
- Clamp workpiece only if lathe chuck is screwed to flange or machine spindle.
- Adjust gear scroll using supplied safety clamping wrench only.
- For work in industrial environments.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Not for use as a toolholder, load handling attachment or hoist.
- Do not clamp square workpieces.
- Do not use if jaws or lathe chuck is cracked or otherwise damaged.
- After a collision with other objects, do not use again until a thorough check has been performed.
- Not to be struck with a hammer.
- Do not exceed the jaws’ clamping ranges.
- Do not clamp long workpieces without additional supports.
- Do not run with chuck key inserted.
- Never exceed speed engraved in clamping device.
- Do not make any unauthorised modifications.