{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de fraisage BDMT 11T308 ER-N3, pour fraises 2 tailles de finition, PR1810
Réf.: 227483 GG
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | BDMT 11T308 ER-N3 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rhombic | |
| Width of insert B | 6.7 mm | |
| Thickness of insert S | 3.8 mm | |
| Length of insert L | 11 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 11 mm | |
| Height of cutting edge | 3.8 mm | |
| Corner radius R | 0.8 mm | |
| Corner chamfer length C | 1.4 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 80 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 18 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | BDMT 11T308 ER-N3 | |
| Attachment hole diameter | 3.8 mm | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 3.8 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | BD11T3083R | |
| Interface coding for insert according to ISO TS 13399-60 | BD11T3083R | |
| Insert designation | BDMT11T308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 227483 GG | |
| EAN / GTIN | 4960664026425 | |
| Réf. fabricant | TLS00034 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau d’application
K
180
Description
Remarque(s):
Les fraises sont équipées du même nombre de plaquettes de type N2 et N3. Respecter l'ordre de positionnement sur le porte-outils.
Valeurs indicatives d'utilisation pour ae = 0,3×D.
Valeurs indicatives d'utilisation pour ae = 0,3×D.