{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Article alternatif :
-
Réf.: 191710 6
Fraise semi-finition, non revêtu, ⌀ k10 DC: 6mm
Réf.: 191640 6
Référence:
Détails du produit
Caractéristiques techniques
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Coating | uncoated | |
| Cutter diameter Dc | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | k10 | |
| Cutting edge length Lc | 13 mm | |
| ISO milling cutter type | end / face mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Twist angle | 25 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Interface | joint 1 | |
| Gauge length A | 23 mm | |
| Weight | 12 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Data carriers | without data carrier | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.3 mm | |
| Max. cutting depth L2 | 13 mm; 6 mm |
Identification et classification
| Référence article | 191640 6 | |
| EAN / GTIN | 4045197104281 | |
| Réf. fabricant | 191640 6 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
83
P
30
P
25
P
25
N
55
Description
Exécution:
Fraises universelles avec profil semi-finition. Coupe au centre pour le fraisage en plongée. Dépouille excentrée. Géométrie de coupe universelle.