{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Hand tap set nitrided, uncoated, M: M14
Réf.: 130450 M14
Référence:
Détails du produit
Caractéristiques techniques
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder tolerance class | h9 | |
| Shank diameter | 11 mm | |
| Thread type | M | |
| Thread nominal diameter metric | 14 mm | |
| Thread | M14x2 | |
| Thread pitch | 2 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Type of thread-cutting tool | hand tap | |
| Content | plug tap; second tap; taper tap | |
| Taper lead form | A; C; D | |
| Pilot pin | with fixed guiding pin | |
| Application for type of drilling | Through hole; Blind hole | |
| To depth (x diameter) | 3; 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 12 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats | 9 mm | |
| Tool material | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length | 42 mm | |
| Overall length | 80 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 352 | |
| Machining method | thread processing internal | |
| Colour ring | red | |
| Type of product | Taps |
Identification et classification
| Référence article | 130450 M14 | |
| EAN / GTIN | 4045197066688 | |
| Réf. fabricant | 130450 M14 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tableau d’application
N
P
P
H
K
Description
Version:
Set of three, consisting of taper, second, and plug tap. Taper tap with long pilot.
Surface nitrided, more resistant to wear.
Surface nitrided, more resistant to wear.
Recommendation:
For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole 0.05 to 0.3 mm larger.