{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Radius indexable insert 12° HSS-Co5, H7, Radius: R8mm
Article no.: 240030 R8
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Tool material | HSS | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | Radiusdrehen | |
| Type of product | Cutter insert | |
| Number of teeth | 4 pcs. | |
| Suitable for material | Universal | |
| Tolerance Class | H | |
| Machining method | plunging (ESE) | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 240030 R8 | |
| EAN / GTIN | 2050001099457 | |
| Manufacturer number | 240832-R |
Description
Version:
Ground all round and each with four radii of the same size. The cutting edges are relief ground and have chip breakers for best cutting conditions over the entire radius sector.
The rake angle of 12° is suitable for general purpose use.
The rake angle of 12° is suitable for general purpose use.
Application:
For turning convex radii on external or internal diameters.