{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Fraise carbure monobloc 10 mm
Article no.: 209515 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
- Direction of infeed: horizontal and oblique
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | no | |
| Flute length Lc | 25 mm | |
| Cutting section dragging LA | 12 mm | |
| Overall length L | 73 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in GRP CRP | 0.08 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 209515 10 | |
| EAN / GTIN | 4045197467089 |
Application Table
N
200
N
190
N
170
N
150
N
180
N
160
N
350
N
190
N
190
N
340
N
Description
Exécution:
Coupes curvilignes, hélicoïdales, permettant un fraisage sans bavures des arêtes inférieure et supérieure de plastiques renforcés de fibres. L’utilisation simultanée d’une coupe en tirant et en poussant permet d’éviter le délaminage. La fraise doit être placée au centre de la section de matériau.