Digital depth micrometer with data output 0-150 mm
Article no.: 425400 0-150
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Standard: Manufacturer’s standard
- Interface: USB interface; Digimatic interface
- Packaging: sturdy box
- Calibration: S15
Product details
Technical Data
| Standard | Manufacturer’s standard | |
| Measuring range | 0 mm - 150 mm | |
| Scale divisions | 0.001 mm | |
| Measuring needle ⌀ | 4 mm | |
| Interface | USB interface; Digimatic interface | |
| Measurement technology | digital | |
| Bridge length | 100 mm | |
| Number of gauging pins | 6 | |
| Packaging | sturdy box | |
| Calibration | S15 | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Article no of the battery / rechargeable battery fitted | 081560 357 | |
| Type of product | Depth micrometer |
Identification numbers & Classifications
| Article number | 425400 0-150 | |
| EAN / GTIN | 4946368695846 | |
| Manufacturer number | 329-250-30 |
Description
Version:
Clear (7.5 mm high), digital measured value display provides quick, error-free readings. Addition reading by vernier.
Various measuring depths can be achieved by exchanging the measuring pins with 25 mm increments. Measuring spindle fully hardened and ground. Base of hardened tool steel with lapped measuring anvil. Micrometer satin chrome-plated. Barrel with clearly engraved black scale and numerals. Constant measuring force due to integral ratchet.
Various measuring depths can be achieved by exchanging the measuring pins with 25 mm increments. Measuring spindle fully hardened and ground. Base of hardened tool steel with lapped measuring anvil. Micrometer satin chrome-plated. Barrel with clearly engraved black scale and numerals. Constant measuring force due to integral ratchet.
Version - image:
Data storage button:
The measurement result can be stored by pressing a button. (E.g. If the measurement position is awkward).
Zero point / absolute size:
Enables zeroing at any position. Absolute zeroing is restored by pressing the button again.
Preset button:
For “zeroing”. This setting is retained after switching off the display.
The measurement result can be stored by pressing a button. (E.g. If the measurement position is awkward).
Zero point / absolute size:
Enables zeroing at any position. Absolute zeroing is restored by pressing the button again.
Preset button:
For “zeroing”. This setting is retained after switching off the display.
Supplied with:
Measuring pins and 1 battery No. 081560 size 357.
Optional extras:
Data cable No. 497445.