{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill indexable drill Combination shank 29,5 mm
Article no.: 234000 29,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 29.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 60 mm | |
| Overhang LA | 83 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 100408 | |
| Pack of insert screws | 239700 10IP (2.8 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 234000 29,5 | |
| EAN / GTIN | 4045197739865 |
Description
Izvedba:
Zaviti hladilni kanali zagotavljajo največjo trdnost, saj jedro svedra zaradi njih ni oslabljeno.
Toleranca izvrtine: −0,1/+0,3 mm
Toleranca izvrtine: −0,1/+0,3 mm
Opis:
Za največjo zmogljivost in natančnost mer. Tudi pri težavnem vrtanju do 5×D.
Uporaba:
Primerno za:
Obračalne ploščice SOGX 100408.
Opomba:
Druge vmesne velikosti v 1/10-enotah so dobavljive po ponudbi.