{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Minifresa in HMI 12 mm
Codice art.: 201920 12
Codice materiale:
- Schneidstoff: VHM
- Norm: Werksnorm
- Typ: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Dettagli prodotto
Dati tecnici
| Cutting edge ⌀ DC | 12 mm | |
| Beschichtung | TiAlN | |
| Schneidstoff | VHM | |
| Norm | Werksnorm | |
| Typ | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Eingriffsbreite ae bei Fräsoperation | Vollnut Schnitttiefe 1×D; 0,5×D bei Besäumen | |
| Shank | DIN 6535 HB to h6 | |
| Innenkühlung | nein | |
| Flute length Lc | 16 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.05 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.06 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.08 mm | |
| Correction factor for vc | 1.25 | |
| Farbring | ohne | |
| Produktart | Eckfräser |
Codice articolo e classificazioni
| Codice articolo | 201920 12 | |
| EAN / GTIN | 4045197114976 |
Tabella dati
N
280
N
200
P
120
P
105
P
100
P
70
M
80
M
60
K
90
Descrizione
Version:
Double relief ground side clearance angle. Centre cutting teeth for plunging.
Weldon shank similar to DIN 6535 HB.
Weldon shank similar to DIN 6535 HB.
Note:
Save on regrinding costs:
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.