{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Fresa toroidale in HMI GARANT Diabolo R1 0,5 2,5X20 mm
Codice art.: 206159 2,5X20
Codice materiale:
- Materiale da taglio: HMI
- Norma: Norma interna
- Modello: H
- Tolleranza ⌀ nominale: 0 / −0,005
- No. of teeth Z: 2
Dettagli prodotto
Dati tecnici
| Serie | Diabolo | |
| Cutting edge ⌀ DC | 2.5 mm | |
| Rivestimento | TiAlN | |
| Materiale da taglio | HMI | |
| Norma | Norma interna | |
| Modello | H | |
| Tolleranza ⌀ nominale | 0 / −0,005 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direzione di avanzamento | orizzontale, obliquo e verticale | |
| Larghezza di fresatura ae per operazioni di fresatura | 0,05×D per fresatura a copiare; 0,05×D per fresatura a copiare | |
| Shank | DIN 6535 HA to h5 | |
| Passaggio interno per LR | no | |
| Flute length Lc | 2.5 mm | |
| Corner radius R1 | 0.5 mm | |
| Overhang length L1 incl. recess | 20 mm | |
| Recess ⌀ D1 | 2.41 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed fz for side milling in steel < 65 HRC | 0.03 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.03 mm | |
| Correction factor ap corr | 0.8 | |
| Colore collarino | rosso | |
| Tipo di prodotto | Frese toroidali |
Codice articolo e classificazioni
| Codice articolo | 206159 2,5X20 | |
| EAN / GTIN | 4045197935731 |
Tabella dati
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Descrizione
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field.
Suitable even for machining electrolytic copper.
Double-relief ground with 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
Special geometry, coating and carbide for hard machining in the high-performance field.
Suitable even for machining electrolytic copper.
Double-relief ground with 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
- Corner radius: R1 = ±0.0025 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
side milling: ap = 0.1×D×apcorr
copying: ap = 0.05×D×apcorr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
side milling: ap = 0.1×D×apcorr
copying: ap = 0.05×D×apcorr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z