{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Tap INOX machine tap HSS-E-PM Form E G1/2
Article no.: 137752 G1/2
Article code:
- Thread type: G
- Flank angle: 55
- Tool material: HSS E PM
- Standard: DIN 5156
- Taper lead form: E
Product details
Technical Data
| Series | Master Tap | |
| Thread size | G1/2 | |
| Coating | TiAlN | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 5156 | |
| Taper lead form | E | |
| Helix angle | 45 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2.5×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.814 mm | |
| Threads per inch | 14 | |
| Thread ⌀ | 20.96 mm | |
| Overall length L | 125 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank square □ | 12 mm | |
| Tapping hole ⌀ | 19 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 5 | |
| Colour ring | blue | |
| Number of cutting edges Z | 5 | |
| Thread depth | 52.4 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 137752 G1/2 | |
| EAN / GTIN | 4062406210328 |
Application Table
N
28
P
23
P
23
P
12
M
11
M
9
Description
Version:
GARANT Master Tap INOX:
High-performance tap, specially developed for good process reliability in stainless and acid-resistant steels and duplex materials.
The 45° helix angle of the chip flutes facilitates chip formation especially in ductile austenitic CrNi steels.
Form E (1.5-2 turns lead chamfer).
High-performance tap, specially developed for good process reliability in stainless and acid-resistant steels and duplex materials.
The 45° helix angle of the chip flutes facilitates chip formation especially in ductile austenitic CrNi steels.
- HSS-E-PM tool material for maximum wear resistance
- The latest generation of TiALN multi-layer coating
- Parameterised flute geometry for optimum chip formation and torsional rigidity
Form E (1.5-2 turns lead chamfer).
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).