{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Bearing extractor individual 2
Article no.: 884700 2
Article code:
Product details
Technical Data
| Length of draw bolt | 280 mm | |
| Clamping depth | 190 mm | |
| Connection thread | M14×1.5 | |
| Type of product | Puller |
Identification numbers & Classifications
| Article number | 884700 2 | |
| EAN / GTIN | 4021176075759 | |
| Manufacturer number | 18-2 |
Description
Version:
Bearing separator of high-quality tool steel.
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Application:
For the separation of tightly wedged ball bearings, gears, etc., if the gap is too small for normal extraction arms.
Suitable for:
Bearing separator No. 884600.
Suitable for:
Bearing separator No. 884600.: 2