{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Fraise carbure monobloc GARANT Master INOX HPC 20 mm
Réf.: 203006 20
Référence:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Détails du produit
Caractéristiques techniques
| Series | Master INOX | |
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 4 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 38 mm | |
| Overhang length L1 incl. recess | 70 mm | |
| Recess ⌀ D1 | 19.5 mm | |
| Overall length L | 126 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.35 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.07 mm | |
| Feed fz for side milling in INOX > 900 N/mm2 | 0.08 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Numéros d’identification et classifications
| Référence article | 203006 20 | |
| EAN / GTIN | 4045197851833 |
Tableau d’application
P
240
P
220
P
180
P
180
P
115
H
80
M
100
M
85
Description
Version:
For roughing and finishing.
HPC milling cutter with newly developed high-performance coating for outstanding tool life and optimum metal removal rate in a very wide range of stainless steels. Greater oxidation resistance and high-temperature hardness.
Can be used at high cutting speeds, particularly suitable even for TOOLOX®.
HPC milling cutter with newly developed high-performance coating for outstanding tool life and optimum metal removal rate in a very wide range of stainless steels. Greater oxidation resistance and high-temperature hardness.
Can be used at high cutting speeds, particularly suitable even for TOOLOX®.
Advantage:
Particularly low vibration running.