{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ER clamping nut for sealing rings 16
Article no.: 309615 16
Article code:
- Standard: DIN 6499 D
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
Product details
Technical Data
| for ER | 16 mm | |
| Standard | DIN 6499 D | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Overall length L | 22.5 mm | |
| External ⌀ D | 28 mm | |
| Thread | M22×1.5 | |
| maximum tightening torque | 80 Nm | |
| Type of product | Clamping nut |
Identification numbers & Classifications
| Article number | 309615 16 | |
| EAN / GTIN | 7640128492160 | |
| Manufacturer number | 5.450.16 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
With hexagon 25 AF.
Suitable for:
All standard ER collet chucks.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Sealing rings No. 309625; 309630; 309635; 309645.
Single open ended spanner (for size 16), No. 613300 size 25.
Sealing rings No. 309625; 309630; 309635; 309645.
Note:
Collet chuck and clamping nut are balanced separately!
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
ER clamping nut for sealing rings 16 |
||||
| External ⌀ D | 28 | 28 | 32 | 33.5 |
| for ER | 16 | 16 | 16 | 16 |
| Thread | M22×1.5 | M22×1.5 | M22×1.5 | M24×1 |
| maximum tightening torque | 80 | 80 | 80 | 54 |
| Standard | DIN 6499 D | DIN 6499 D | DIN 6499 D | DIN 6499 D |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | G 2.5 at 25,000 rpm | G 2.5 at 25,000 rpm | G 2.5 at 25,000 rpm |
| Type of product | Clamping nut | Clamping nut | Clamping nut | Clamping nut |