Machine tap for synchronised spindles HSS-E-PM TiAlN
- Flank angle: 60 °
- Thread standard: DIN 13
- Taper lead form: B
- Shank: DIN 1835 B with h6
- Application for type of drilling: up to 2.5×D for through holes
Sturdy design with spiral point and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%).