{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC, TiAlN, ⌀ f8 DC: 12mm
Article no.: 202976 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 16 mm | |
| Overall length L | 73 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.15 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 60 HRC | 0.03 mm | |
| Feed fz for side milling in steel < 60 HRC | 0.035 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202976 12 | |
| EAN / GTIN | 4045197431301 | |
| Manufacturer number | 202976 12 |
Application Table
P
160
P
115
P
115
H
60
H
30
H
25
H
20
Description
Version:
Significant cutting force reduction due to 45° helix.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
For materials > 55 HRC we recommend reducing the depth of cut to ap =0.25×D...0.5×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide roughing end mill MTC, TiAlN, ⌀ f8 DC: 12mm |
||||||
| Coating | TiAlN | TiAlN | AlCrN | TiAlN | TiSiN | TiAlN |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | red | without | green | green | green | without |
| Through-coolant | no | no | no | no | no | no |
| Flute length Lc | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Tolerance nominal ⌀ | f8 | e8 | e8 | e8 | e8 | e8 |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |