Article no.: 206162 10/1,5

Diabolo solid carbide torus cutter HPC 10/1,5 mm

    • No price available
on request
In stock
3 pieces in stock
Brand: GARANT
Tool material: Solid carbide
Standard: Manufacturer’s standard
Type: H
Tolerance nominal ⌀: e8
No. of teeth Z: 2
Helix angle: 30 °
Direction of infeed: horizontal, oblique and vertical
Cutting width a<sub>e</sub> for milling operation: 0.2×D for side milling
Cutting width a<sub>e</sub> for milling operation: 0.05×D for copy milling
Shank: DIN 6535 HA to h6
Machining strategy: HPC

Information

  • Tool material: Solid carbide
  • Standard: Manufacturer’s standard
  • Type: H
  • Tolerance nominal ⌀: e8
  • No. of teeth Z: 2

Technical Data

Series Diabolo
Cutting edge ⌀ DC 10 mm
Coating TiAlN
Tool material Solid carbide
Standard Manufacturer’s standard
Type H
Tolerance nominal ⌀ e8
No. of teeth Z 2
Helix angle 30 °
Direction of infeed horizontal, oblique and vertical
Cutting width ae for milling operation 0.2×D for side milling; 0.05×D for copy milling
Shank DIN 6535 HA to h6
Through-coolant no
Machining strategy HPC
Flute length Lc 6 mm
Corner radius R1 1.5 mm
Overhang length L1 incl. recess 40 mm
maximum shank recess dia. D6 11.9 mm
Recess ⌀ D1 9.8 mm
Overall length L 160 mm
Shank ⌀ Ds 12 mm
L2 80 mm
Feed fz for side milling in steel < 65 HRC 0.07 mm
Feed fz for copy milling in steel < 65 HRC 0.07 mm
Shank tolerance h6
Colour ring red
Type of product Torus cutter
Article number 206162 10/1,5
EAN / GTIN 4045197597816

Description

Version:

GARANT Diabolo:
Special geometry, coating and carbide, specially for hard machining.
For copy milling with angle α: 1° 30′. Double relief ground side clearance angle.
Tolerances:
  • Corner radius: R1= ±0.005 mm.
  • Angle α= ±20′.

Note:

Standard application values: fz for ap = 0.1×D.

Application Table

Steel < 1400 N/mm²
P
180
Steel < 50 HRC
H
170
Steel < 55 HRC
H
140
Steel < 60 HRC
H
135
Steel < 65 HRC
H
100
wet maximum
 
wet minimum
 
dry
 
Air
 

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Share this product

or copy this link

Add to shopping list

Select article variation and quantity

⌀ e8 DC / R1 (mm) Unit price incl. VAT
To shopping cart