{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide centre drills A, uncoated, ⌀ DC k13: 1,25mm
Article no.: 121000 1,25
Article code:
- Tool material: Solid carbide
- Standard: DIN 333
- Type: A
- Tolerance nominal ⌀: k13
- Countersink angle: 60
Product details
Technical Data
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 333 | |
| Type | A | |
| Tolerance nominal ⌀ | k13 | |
| Countersink angle | 60 degrees | |
| Cutting direction | right-hand | |
| Shank | Parallel shank to h6 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Nominal ⌀ DC | 1.25 mm | |
| for workpiece ⌀ | 8 − 10 mm | |
| Shank ⌀ Ds | 3.15 mm | |
| Shank tolerance | h6 | |
| Overall length L | 31.5 mm | |
| Feed f in steel < 1100 N/mm2 | 0.02 mm/rev. | |
| Colour ring | without | |
| Type of product | Centre drill |
Identification numbers & Classifications
| Article number | 121000 1,25 | |
| EAN / GTIN | 4045197038333 | |
| Manufacturer number | 121000 1,25 |
Application Table
N
200
N
180
N
160
P
80
P
75
P
65
P
50
P
35
M
35
M
30
S
25
K
70
N
160
Description
Version:
Ground from solid carbide bar. Spiral fluted.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide centre drills A, uncoated, ⌀ DC k13: 1,25mm |
||||||
| for workpiece ⌀ | 8 − 10 mm | 8 − 10 mm | 8 − 10 mm | 8 − 10 mm | 8 − 10 mm | 8 − 10 mm |
| Through-coolant | no | no | no | no | no | no |
| Standard | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 | DIN 333 |
| Shank | Parallel shank to h6 | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h7 | Parallel shank to h6 |
| Shank tolerance | h6 | h7 | h7 | h7 | h7 | h6 |
| Tolerance nominal ⌀ | k13 | k12 | k12 | k12 | k12 | k13 |
| Shank ⌀ Ds | 3.15 mm | 3.15 mm | 3.15 mm | 3.15 mm | 3.15 mm | 3.15 mm |