{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 100 mm | |
Number of cutting edges Z | 7 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 15.7 mm | |
Overall length Ltot | 55 mm | |
Mounting bore ⌀ | 32 mm | |
⌀ D3 | 93 mm | |
Circular interpolation milling ⌀ Dmin | 193 mm | |
Circular interpolation milling ⌀ Dmax | 198 mm | |
Ramping angle αmax | 0.16 degrees | |
Ramping length L for αmax | 91.6 mm | |
suitable indexable insert | BDMT 170408 | |
Insert screw | 229709 (T15; 3.5 Nm) | |
Type of product | End / face mill |
Article number | 227510 100/7 | |
EAN / GTIN | 4960664489343 | |
Manufacturer number | THN03433 |
This article |
Recommendations |
|
---|---|---|
Indexable milling cutter 90° MEC17, with bore, ⌀ D / number of teeth Z: 100/7mm |
||
Number of cutting edges Z | 7 | 7 |
Overall length Ltot | 55 mm | 50 mm |
Through-coolant | yes | yes |
suitable indexable insert | BDMT 170408 | AP.. 1805.. |
Shank type | with bore | with bore |
Cutting edge ⌀ DC | 100 mm | 100 mm |
Type of product | End / face mill | End / face mill |