Article no.: 215609 12/3

Softcut® 90° shoulder mill MTC long 12/3 mm

    • No price available
on request
In stock
27 pieces in stock
Brand: GARANT
Setting angle κ: 90 °
Milling application: Circular milling
Milling application: Ramping
Milling application: End milling
Spacing of the cutters: unequal spacing
Through-coolant: yes
Machining strategy: MTC
Tool exchange: PowerCard

Information

  • Setting angle κ: 90 °
  • Milling application: Circular milling
  • Milling application: Ramping
  • Milling application: End milling
  • Spacing of the cutters: unequal spacing

Technical Data

Cutting edge ⌀ DC 12 mm
Number of cutting edges Z 3
Shank type Plain shank
Setting angle κ 90 °
Milling application Circular milling; Ramping; End milling
Spacing of the cutters unequal spacing
Through-coolant yes
Machining strategy MTC
Tool exchange PowerCard
Overhang L1 17 mm
Overall length Ltot 62 mm
Shank ⌀ Ds h6 12 mm
⌀ D3 10 mm
Circular interpolation milling ⌀ Dmin 18 mm
Circular interpolation milling ⌀ Dmax 22 mm
Circular interpolation milling ap 0.8 mm
Ramping angle αmax 1.29 °
Ramping length L for αmax 8.85 mm
suitable indexable insert AP.. 0602..
Pack of insert screws 219827 (6IP; 0.45 Nm)
Type of product End / face mill
Article number 215609 12/3
EAN / GTIN 4045197409805

Description

Version:

High precision indexable face mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable face mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power. Suitable inserts APMT 0602..

Application:

For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistantsteels.

Spare part:

Pack of insert screws No. 219827 (6IP; 0.45 Nm).

Note:

GARANT torque screwdriver TQ No. 211750 size 0.45, use bit No. 674252 size 6IP.
The insert pocket must be modified when using indexable inserts with a radius of 2 mm.

Compatible inserts

Spare parts

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Share this product

or copy this link

Add to shopping list

Select article variation and quantity

⌀ D / number of teeth Z (mm) Unit price incl. VAT
To shopping cart