Screw extractor with fine flutes 2
Brand: mob PEDDINGHAUS
This article is also availabe in a set
|Pre-drill ⌀||3.2 mm|
|suitable for screws/bolts||M5 − M7|
|Type of product||Screw extractor|
|Article number||082860 2|
|EAN / GTIN||2050001695352|
Made of chrome vanadium steel. The sharp edges of the flutes dig into the drilled screw and allow it to be unscrewed. With square drive for use with tap wrench etc.
IP20: No protection against penetration by foreign bodies with ⌀ < 12 mm, however touching should be avoided, and no protection against water.
For extraction of broken off screws with right-hand thread (pre-drill the hole ⌀ as listed in the table; turn the screw extractor anti-clockwise).
UNC and UNF threads available on request.