{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
PowerDrill vändskärsborr kombiskaft 5×D 29,5 mm GARANT
Article no.: 234015 29,5
Artikkelkode:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: ja
- Machining strategy: HPC
Produktinformasjon
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 29.5 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | ja | |
| Machining strategy | HPC | |
| Reach L1 | 150 mm | |
| Overhang LA | 173 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 100408 | |
| Pack of insert screws | 239700 10IP (2.8 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Artikkelkode | 234015 29,5 | |
| EAN / GTIN | 4045197697301 |
Beskrivelse
Version:
The helical coolant ducts ensure very high stability, since they do not weaken the core of the drill.
Bore tolerance: −0.1 / +0.35 mm
Bore tolerance: −0.1 / +0.35 mm
Description:
For maximum performance and dimensional accuracy. Even for very difficult drilling situations up to 5×D.
Application:
Suitable for:
Inserts SOGX 100408.
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
Other intermediate sizes in 1/10 increments available on request.