Version:
With
crystalline diamond sp3 coating. For the
highest demands regarding performance and precision in fibre-reinforced composites, CRP, GRP, and graphite.
Extremely tight tolerances ensure maximum accuracy. Double relief ground with 2 hollow-ground chamfers.
Recess angle α = 16°.Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.1×D×ap korr
side milling: ap = 0.2×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z