{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque screwdriver without scale, to take interchangeable blades 500 cNm
Article no.: 659958 500
Article code:
Click to enlarge image
Click to enlarge image
6 mm blade
Click to enlarge image
Labelling field for the customer’s torque setting.
Click to enlarge image
Torque setting under the cover flap.
Product details
Technical Data
| maximum torque | 500 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 124 mm | |
| set torque | 3 Nm | |
| set torque | 300 cNm | |
| Torque range | 100 cNm - 500 cNm | |
| Torque range | 1 Nm - 5 Nm | |
| suitable interchangeable blades | 6 mm | |
| Release signalling | acoustic; haptisk | |
| Trigger principle | mechanical short travel release | |
| Connection format | exchangeable blade | |
| Measurement technology | mechanical | |
| Torque fixed setting | no | |
| Data can be recorded | no | |
| Setting the trigger value | without setting scale (requires torque analyser) | |
| Feedback | triggering | |
| Reversible reading | cNm | |
| Measurement process | Torque | |
| Adjustable trigger value | preset | |
| Standard | DIN EN ISO 6789 | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659958 500 | |
| EAN / GTIN | 7610733291748 | |
| Manufacturer number | 8314.A 3.0 NM |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque can be set by stepless adjustment using a torque analyser (No. 654300 − 654460) and a 5 AF hexagon screwdriver (not supplied).
The desired torque can be set by stepless adjustment using a torque analyser (No. 654300 − 654460) and a 5 AF hexagon screwdriver (not supplied).
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.