{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX CleverDrill HSS jobber drill N 3,25
Article no.: 114031 3,25
Article code:
- Tool material: HSS
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Series | CleverDrill | |
| Nominal ⌀ DC | 3.25 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 31.2 mm | |
| Flute length Lc | 36 mm | |
| Overall length L | 65 mm | |
| Shank ⌀ Ds | 3.25 mm | |
| Feed f in steel < 750 N/mm2 | 0.03 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114031 3,25 | |
| EAN / GTIN | 4062406743840 |
Application Table
N
80
N
60
N
50
P
35
P
32
P
22
P
18
K
30
N
40
Description
Uitvoering:
HOLEX CleverDrill: Stabiele boor voor alle standaardtoepassingen. Verbeterd aanboorgedrag door kruisslijping. Kerndikte en kernstijging normaal. Profielgeslepen. Oppervlak: Bronskleurig ontlaten spiraalgroef.
Advies:
Maximale boordiepte:
L2 = LC - 1,5 × DC.
L2 = LC - 1,5 × DC.
Tip:
Opvolger van nr. 114030.
Maat 13,2 – 20: Met smaller toelopende schacht-⌀ 12,7 mm.
Maat 13,2 – 20: Met smaller toelopende schacht-⌀ 12,7 mm.