{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
NC razvrtač 12,04 mm
Artikl br.: 162902 12,04
Šifra artikla:
- Tolerancija: 0 / 0,005
- Rezni materijal: HSS E
- Standard: Standard proizvođača
- Unutarnje hlađenje: ne
- Drška: DIN 1835 A
Pojedinosti o proizvodu
Tehnički podaci
| Nazivni ⌀ DC | 12,04 mm | |
| Prevlaka | bez prevlake | |
| Tolerancija | 0 / 0,005 | |
| Rezni materijal | HSS E | |
| Standard | Standard proizvođača | |
| Unutarnje hlađenje | ne | |
| Drška | DIN 1835 A | |
| Primjena kod vrste bušenja | kod prolazne rupe | |
| Duljina rezne oštrice Ls | 44 mm | |
| Duljina izboja L1 | 110 mm | |
| Ukupna duljina L | 151 mm | |
| Broj oštrica Z | 6 | |
| ⌀ drške Ds | 10 mm | |
| Posmak f u čeliku < 750 N/mm2 | 0,25 mm/okr | |
| Mjera za razvrtanje u ⌀ | 0,1 mm - 0,2 mm | |
| Prsten u boji | zeleno | |
| Vrsta proizvoda | Phillips vijcani nastavak |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 162902 12,04 | |
| EAN / GTIN | 4062406146610 |
Tablica aplikacija
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Opis
Version:
Reamers such as 162900, but in 1/100 sizes.
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets.
With long flutes and left-hand helix.
Tolerance specifications:
Size 1.01 – 5.5: Manufacturing or cutting edge tolerance 0 / +0.004 mm.
Size 5.51 – 12.05: Manufacturing or cutting edge tolerance 0 / +0.005 mm.
Ordering example:
Desired dia. 6.24 mm – ordering particulars: article number 162902 6.24.
The 6.24 mm reamer with tolerance 0 / +0.005 mm is supplied.
Depending on availability, delivery time is from stock or max. 1 working week.
To determine which diameter you need for your desired fit, please see the following table (page 231). Often one reamer also covers further fits, since the tolerance bands overlap.
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets.
With long flutes and left-hand helix.
Tolerance specifications:
Size 1.01 – 5.5: Manufacturing or cutting edge tolerance 0 / +0.004 mm.
Size 5.51 – 12.05: Manufacturing or cutting edge tolerance 0 / +0.005 mm.
Ordering example:
Desired dia. 6.24 mm – ordering particulars: article number 162902 6.24.
The 6.24 mm reamer with tolerance 0 / +0.005 mm is supplied.
Depending on availability, delivery time is from stock or max. 1 working week.
To determine which diameter you need for your desired fit, please see the following table (page 231). Often one reamer also covers further fits, since the tolerance bands overlap.