{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
Solid carbide drill plain shank DIN 6535 HA TiAlN 1,85 mm GARANT
Artikl br.: 122659 1,85
Šifra artikla:
Klikni za povećanje slike
Plain shank DIN 6535 HA
Klikni za povećanje slike
Klikni za povećanje slike
Klikni za povećanje slike
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m6
- Number of cutting edges Z: 2
Pojedinosti o proizvodu
Tehnički podaci
| Nominal ⌀ DC | 1,85 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 13,3 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 16 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 4 mm | |
| Shank tolerance | h6 | |
| Feed f in stainless steel > 900 N/mm2 | 0,033 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 122659 1,85 | |
| EAN / GTIN | 4045197582331 |
Tablica aplikacija
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Opis
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.