{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Tap SteelHT machine tap HSS-E-PM Form B, TiCN, G: G1/8
Article no.: 133312 G1/8
Copy
Article code:
Copy
- Thread type: G
- Flank angle: 55
- Tool material: HSS E PM
- Standard: DIN 5156
- Taper lead form: B
Product details
Technical Data
| Series | Master Tap | |
| Thread size | G1/8 | |
| Coating | TiCN | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 5156 | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0,907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9,73 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 7 mm | |
| Shank square □ | 5,5 mm | |
| Tapping hole ⌀ | 8,8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | red | |
| Number of cutting edges Z | 3 | |
| Thread depth | 29,19 mm | |
| Type of product | Tap |
Identification & Classification
| Article number |
133312 G1/8
Copy |
|
| EAN / GTIN |
4062406236038
Copy |
|
| Manufacturer number |
133312 G1/8
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
P
ISO code:
30
suitable for / [m/min]
P
ISO code:
20
suitable for / [m/min]
P
ISO code:
15
suitable for / [m/min]
P
ISO code:
12
suitable for / [m/min]
H
ISO code:
5
suitable for / [m/min]
H
ISO code:
15
suitable for / [m/min]
H
ISO code:
5
suitable for / [m/min]
M
ISO code:
7
suitable for / [m/min]
S
ISO code:
5
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials. Strong spiral point, for process stability at high cutting forces.
- HSS-E-PM tool material – for very high cutting edge stability.
- Optimised honed cutting edges.
- TiCN coating – for maximum wear protection.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by selecting a larger tapping hole diameter.