{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Tap machine tap HSS-E-PM Form B 6GX, AlTiX, M: M2
Article no.: 132724 M2
Copy
Article code:
Copy
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M2 | |
| Coating | AlTiX | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 3X 6GX | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0,4 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 2,8 mm | |
| Shank square □ | 2,1 mm | |
| Tapping hole ⌀ | 1,6 mm | |
| Thread ⌀ | 2 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 2 | |
| Colour ring | green | |
| Series | Master Tap | |
| Number of cutting edges Z | 2 | |
| Thread depth | 6 mm | |
| Type of product | Tap |
Identification & Classification
| Article number |
132724 M2
Copy |
|
| EAN / GTIN |
4045197899750
Copy |
|
| Manufacturer number |
132724 M2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
30
suitable for / [m/min]
N
ISO code:
35
suitable for / [m/min]
N
ISO code:
20
suitable for / [m/min]
P
ISO code:
30
suitable for / [m/min]
P
ISO code:
30
suitable for / [m/min]
P
ISO code:
25
suitable for / [m/min]
P
ISO code:
12
suitable for / [m/min]
P
ISO code:
8
suitable for / [m/min]
M
ISO code:
10
suitable for / [m/min]
M
ISO code:
8
suitable for / [m/min]
K
ISO code:
20
suitable for / [m/min]
N
ISO code:
20
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
Tolerance class: ISO 3X/6GX
For components which are galvanised or shrink slightly when hardened.
- HSS-E-PM tool material for a high degree of wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Tolerance class: ISO 3X/6GX
For components which are galvanised or shrink slightly when hardened.
Application:
For components which are galvanised or shrink slightly when hardened.
Recommendation:
We recommend increasing the size of the tapping hole ⌀ by the tolerance allowance.