{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 139511 M6
Thread milling cutter 1.5×D TiAlN M6 GARANT
Article no.: 139510 M6
Article code:
- Thread type: M; M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA with h6
Product details
Technical Data
| Thread size | M6 | |
| Coating | TiAlN | |
| Thread type | M; M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA with h6 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 1.5×D for blind holes; up to 1.5×D for through holes | |
| Countersink angle | 90 degrees | |
| Thread pitch | 1 mm | |
| Cutting edge ⌀ DC | 4,85 mm | |
| Cutter length lc | 10,2 mm | |
| Shank length Ls | 36 mm | |
| Overall length L | 59 mm | |
| Shank ⌀ Ds | 8 mm | |
| Neck ⌀ D1 | 6,3 mm | |
| Programming value for countersink Lc | 11,5 mm | |
| Width of groove e1 | 1 mm | |
| Feed fz in cast aluminium | 0,05 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 2 | |
| Colour ring | without | |
| Internal/external application | Internal | |
| Thread depth | 9 | |
| Type of product | Combination drill / thread mill |
Identification numbers & Classifications
| Article number | 139510 M6 |
Application Table
N
220
N
220
K
90
N
330
Description
Version:
Corrected thread profile for milling exact internal threads (be sure to provide stable clamping conditions).
Incorporating a countersink profile for a 90° countersink.
A stronger core diameter, two narrow geometrically optimised chip flutes and a special drill point result in good chip formation and low cutting pressure.
Incorporating a countersink profile for a 90° countersink.
A stronger core diameter, two narrow geometrically optimised chip flutes and a special drill point result in good chip formation and low cutting pressure.
Advantage:
Drilling, countersinking and thread milling all with a single tool!