45° indexable end mill Weldon shank 20/3 mm GARANT
Article no.:
214395 20/3
- Setting angle κ: 45 °
- Milling application: Circular milling
- Milling application: Ramping
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 45 ° | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax | 28,2 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 90 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| suitable indexable insert | SD... 0903 | |
| ⌀ D3 | 28 mm | |
| Circular interpolation milling ⌀ Dmin | 48 mm | |
| Circular interpolation milling ⌀ Dmax | 54 mm | |
| Circular interpolation milling ap | 1,5 mm | |
| Ramping angle αmax | 1,64 mm | |
| Ramping length L for αmax | 17,5 mm | |
| Pack of insert screws | 219809 (8IP; 1.5 Nm) | |
| Type of product | Face mill | |
| Article number | 214395 20/3 | |
| EAN / GTIN | 4045197221629 |
Description
Version:
High number of cutting edges for very high productivity. Positive rake for soft cut and low power consumption.
Advantage:
Very high productivity due to:
- Very high cutting speeds.
- Very high feed rates.
- Short machining times.