{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill HPC TiAlN 2/6 mm GARANT
Article no.: 207363 2/6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / −0.02
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / −0.02 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 2 mm | |
| Radius R | 1 mm | |
| Overhang length L1 incl. recess | 4 mm | |
| Recess ⌀ D1 | 1,9 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 70 HRC | 0,005 mm | |
| Feed fz for copy milling in steel < 70 HRC | 0,005 mm | |
| Correction factor for vc | 1,25 | |
| Colour ring | red |
Identification numbers & Classifications
| Article number | 207363 2/6 |
Application Table
H
150
H
110
H
90
H
80
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strengthand at the same time excellent wear resistance for optimum process reliability.
Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Size 1 − 5: recess angle α= 15°.
Tolerances:
Special solid carbide substrate with extremely high tensile strengthand at the same time excellent wear resistance for optimum process reliability.
Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Size 1 − 5: recess angle α= 15°.
Tolerances:
- Corner radius: Radius contour ±0.005 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.