Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 563430

      Cutting disc SG-ELASTIC EXTRA THIN 115 mm

      Brand: Pferd
      Grinding medium code A
      maximum circumferential speed 80
      Iron, sulphur and chlorine constituents < 0.1
      recommended approach angle 90
      optimised for material INOX
      No price available

      Cutting disc SG-ELASTIC EXTRA THIN 115 mm

      Subsequent delivery



      • Grit, bonding, abrasive additives as well as reinforcement of the cut-off discs are optimised for maximum cutting performance and working life in their respective applications.
      • Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) specially suited for quick burr-free cutting with low thermal stress. On older angle grinders please ensure discs are precisely centred! Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
      • Shapes: Cutting discs flat (shape 41) or with depressed centre (shape 42).

      Extra thin cutting disc for very quick low-burr cutting with low thermal stress and easy ergonomic cut guidance.
      High-performance cutting disc SG high-performance range with very high cutting performance and long service life (hardness R).


      For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.


      The disc thickness should be at least 20% of the material thickness to be cut. For stainless steel, use cutting discs at reduced speed.

      Application Table

      Alu Mg
      Steel < 900 N/mm²
      Steel < 1400 N/mm²
      Steel < 55 HRC
      Steel < 60 HRC
      Steel < 67 HRC
      Plastic, GRP