{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shoulder mill 90° MEC11T with plain shank, for indexable inserts BD..
Article no.: 227300 25/3L
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, radial | |
| Cooling lubricant | yes | |
| Series | MEC11T | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0200 mm | |
| Holder tolerance class | h7 | |
| Shank diameter | 20 mm | |
| Shank length | 91 mm | |
| Cutter diameter min. | 25 mm | |
| Neck diameter | 19 mm | |
| Max. cutting edge length | 10 mm | |
| Head length | 34 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 12 degrees | |
| Plunge angle max. | 2.5 degrees | |
| Plunge depth max. | 10 mm | |
| Ramp distance | 10 mm; 18 mm | |
| Number of cutters peripheral side | 3 | |
| Number of cutters end face | 3 | |
| Number of steps | 1 | |
| Number of indexable inserts | 3 | |
| Shank type | Plain shank | |
| Diameter of shaft | 20 mm | |
| Interface | joint 1 | |
| Gauge length | 34 mm | |
| Usable length | 23.9 mm | |
| Overall length | 120 mm | |
| Functional length | 120 mm | |
| Max. speed | 37,500 min-1 | |
| Weight | 326 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Machining method | End milling; circular milling (round milling); countersinking (plunge milling) | |
| Type of product | End / face mill | |
| Content | single part |
Identification & Classification
| Article number | 227300 25/3L | |
| EAN / GTIN | 4960664396092 | |
| Manufacturer number | THN03182 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Description:
MEC11T mill type with higher stability due to lower number of cutters than MECX. This enables higher feed rates per cutter.