{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 10 mm | |
Coating | TiAlN | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | NR | |
Tolerance nominal ⌀ | k12 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.15×D for side milling | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 45 mm | |
Overall length L | 95 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for side milling in steel < 750 N/mm2 | 0.019 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 192610 10 | |
EAN / GTIN | 4067263291077 | |
Manufacturer number | 192610 10 |
This article |
Recommendations |
|||
---|---|---|---|---|
Roughing end mill HSS-Co8, TiAlN, ⌀ k12 DC: 10mm
on request
In stock
209 pieces in stock
62,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
63,48 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
160 pieces in stock
62,79 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
128 pieces in stock
54,74 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | without | without | yellow | without |
Milling profile | NR | NF | WR | HR |
Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
Flute length Lc | 45 mm | 45 mm | 45 mm | 45 mm |
Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
Corner chamfer width at 45° | 0.5 mm | 0.3 mm | 0.3 mm | 0.18 mm |
Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm |