{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.º de cat.:
PFERD TOOLS Carda brocha, sin trenzar PBU Ø 20 mm, mango Ø 6 mm, alambre de latón Ø 0,50
Número de artículo: 4007220153239
Código del artículo:
Tenga en cuenta el mayor plazo de entrega y el servicio de asesoramiento técnico limitado:
Pedimos este artículo para usted directamente al fabricante, ya que no forma parte de nuestra gama principal y, por tanto, no lo tenemos en stock.
InformaciónDetalles de producto
Datos técnicos
| Longitud total | 70 mm | |
| Grosor cerdas | 0,5 mm | |
| Material filamentos | latón | |
| Versión del material dotación | forma lisa | |
| Altura filamentos | 25 mm | |
| Diámetro cepillo | 20 mm | |
| Tipo de boca | Funcionamiento a máquina | |
| Asiento | mango | |
| Diámetro vástago | 6 mm | |
| Número de revoluciones máx. | 18.000 min-1 | |
| Empleo típico | Desbarbado; Limpieza | |
| Tipo de producto | Cepillo tipo brocha |
Identificación y clasificación
| Número de artículo | 4007220153239 | |
| EAN / GTIN | 4007220153239 | |
| Número del fabricante | 43202002 | |
| Número L | L51510 487 | |
| Fabricante/responsable | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Germany, www.pferd.com |
Descripción
Description:
- Suitable for light brushing such as deburring, cleaning and derusting.
- Brushes with brass wire filament material are suitable for particular applications such as surface finishing on workpieces made from copper and brass.
- In comparison to steel wire, brass wire is softer and more flexible.
- For all brushes with brass wire, PFERD TOOLS uses wire quality CuZn37.
- Brass wire withstands temperatures up to 180 °C.
Feature:
- Packaging: Industrial packaging
- PFERD TOOLS type: PBU 2022/6 MES 0,50
- Max. RPM: 18000 RPM
- RPM, optimum, from: 7200 RPM
- RPM, optimum, to: 11700 RPM
- Mounting system: Shank
- Dia. cup: 22 mm
- Dia. filament material: 0.5 mm
- Dia. external, metric: 20 mm
- Dia. shank, metric: 6 mm
- Filament material: Brass wire (MES)
- Length, filament: 25 mm
- Length, total: 70 mm
Advantage:
- Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
- Non-sparking.
- Creates fine surfaces.
Application:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Removing oxide layers
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Material:
- Materials that can be worked:
- Brass
- Copper
- Other non-ferrous metals
- Zinc
- Materials that can be worked: Brass; Copper; Other non-ferrous metals; Zinc
Note:
- When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.