{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.º de cat.:
Microfresa de MDI GARANT Diabolo, TiAlN, ⌀ DC × L1: 1,2X10mm
Número de artículo: 201631 1,2X10
Código del artículo:
Detalles de producto
Datos técnicos
| Through-coolant | no | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Diabolo | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Diabolo VHM-Microfräser; GARANT Diabolo VHM-Microfräser | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 4 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$05 | |
| Shank diameter | 4 mm | |
| Shank length | 27 mm | |
| Holder diameter, ISO tolerance class | 4 mm | |
| Holder diameter, upper dimension | 0 mm | |
| Holder diameter, lower dimension | -0.005 mm | |
| Oil | suitable | |
| Shank type | HA | |
| Quality and test seal | none | |
| Air | suitable only under restricted conditions | |
| Guideline / labelling | None | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Coating | TiAlN | |
| Cutter diameter | 1.2 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Upper dimension | 0 mm | |
| Lower dimension | -0.005 mm | |
| Cutting edge length | 1.8 mm | |
| Head length | 1.8 mm | |
| ISO milling cutter type | L | |
| Balancing quality | 0 | |
| Relief angle | 0 degrees | |
| Side rake angle | 15 degrees | |
| Number of effective cutters, peripheral side | 2 | |
| Number of effective cutters, end face | 2 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Helical pitch | 30 mm | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 2 | |
| Interface | joint 1 | |
| Gauge length | 10 mm | |
| Overall length | 45 mm | |
| Functional length | 18 mm | |
| Max. speed | 45,000 min-1 | |
| Weight | 6 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | End milling; face milling; form milling (die milling); slot milling | |
| Colour ring | red | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.003 mm | |
| Max. cutting depth | 0.048 mm; 1.8 mm |
Identificación y clasificación
| Número de artículo | 201631 1,2X10 | |
| EAN / GTIN | 4045197932877 | |
| Número del fabricante | 201631 1,2X10 | |
| Fabricante/responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tablas de Aplicación
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Descripción
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Tolerances:
Recess angle α = 16°.
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Recess angle α = 16°.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z